 |
|
 |
|
|
|
ETG1600 – 1600W
new FM icefet® transmitter 1600W technological revolution and amazing lookELENOS has created a new high-performance FM Transmitter that is the state-of-the-art technology in transmitters offered nowadays. The new Indium series ensures highest electrical efficiency, excellent performance and energy savings like nothing else. efficiency and energy savings at all power levels
The Indium series of transmitters have gone beyond the limits of technology and devices of today by proving power efficiency of up to 80%. These levels make a big difference in operation costs, and the heat reduction increases the useful life of the transmitter. ULTRA COMPACT SIZE: CONCENTRATED POWERThis new series of transmitters consists of no more than two rack units and less than 33 pounds: half the weight of similar devices, with great advantages in terms of Shipping and handling. PLANAR TECHNOLOGYThe Indium Series widely uses the planar technology for the entire RF section (RF modules, combiners, splitters and low-pass filter), to minimize internal connections and soldering. With all this, stability increases, chances of failure are severely reduced, and maintenance is simplified. ECOSAVINGDue to the high electrical efficiency, the internal temperatures of the transmitters remain outstandingly low. Energy saving, environmental protection and long product life are guaranteed. “EASY SURFING”: SIMPLE AND IMMEDIATE MONITORINGIndium has also given special attention to ergonomics. It’s now possible to configure all the parameters of the transmitter by simply navigating through the software menus by using a control knob. The transmitter features some easy access buttons as well which take you directly to main functions of it, so you can operate it immediately. All operating parameters such as voltage, temperature, power, among others, are shown in an O-LED display. Transmitter also includes a series of LEDs that provide a quick snapshot of the main state of the equipment. Complete monitoring capabilities of all the parameters featured on the transmitter usually allow maintenance to be performed without special instruments. NO CORROSIONIn ELENOS, we pay particular attention to the flow of air inside the transmitter, so we make sure that the direct flow of cooling air doesn’t come in touch with the equipment’s electronic boards by inducing a process of tropicalization, so all these boards are protected from moisture. The transmitter’s parts are all-aluminum in order to avoid any kind of corrosion. By doing all this, we ensure that the transmitter can work in extreme environmental conditions. CONNECTIVITYFeatures TC/TS for integration with exchange systems and the interface at each remote monitoring system, carried out directly by the device’s software. The transmitter can store up to 6 different profiles of operation where you can configure all its working parameters (frequency, power, audio modes, levels, and more). Six relay outputs with indication of the profile in use. The interface allows the transmitter to be used as a reserve in any N+1 system. Transmitters from the Indium Series can be supplied with Ethernet port for connecting to a network with TCP/IP – SNMP. The transmitter also has an integrated web server for control over the internet. (This option will be available soon). The device can be equipped with an internal GSM modem for management over SMS. (This option will be available soon). Features a full range of fast and remote diagnostics. HostLink standard protocol makes it simple to handle large amounts of data to diagnose remotely.
|
|
Send mail to
web@radiocomm.hr with
questions or comments about this web site.
|
